In the last entry, I wrote about how we had developed the campaign to the point where we were now in the studio, taking photos in preparation for the poster campaign. Unfortunately, having looked at them over the following weekend, I decided that they weren’t good enough to use and so on the following Monday, we went back to the studio.

Photoshoot Number 2

On our first trip to the studio, we had to set up ourselves and as I’ve already written, I’m not a photographer. We struggled along and did take some shots that were adequate, but none that stood out. Luckily on the second visit, we managed to find Mike Pumford, Kingsway’s technician who generously took a moment of his time to help us out and set the equipment up correctly and we started taking much better shots.

A few unaltered photos from our second photoshoot.

A few unaltered photos from our second photoshoot.

A few unaltered photos from our second photoshoot.

As you can see, these images proved to be much more professional, even at an unedited stage. We ended up taking a lot of photos. Some good, some bad. But there were quite a number of them that stood out.

A few unaltered photos from our second photoshoot.

A few unaltered photos from our second photoshoot.

In order to get people to pay attention to the posters, I felt that some tight closeups of his face were important. His costume was secondary. His green, over-exaggerated face was what would attract people to look at and read the posters.

Making Viral Man larger than life

The next day, I began sifting through all of the photos we had taken. With three photos picked out, I set to work on making him larger than life. It was important that the character only resembled a normal person, rather than simply looking like a person with green facepaint. So, in order to do this, I started exaggerating his eyes to the point where there was no doubt that these eyes could never belong to a normal human being.

A digital makeup check and an exaggeration of the eyes.

I started by performing a digital makeup check on the eyes, improving the coverage of the facepaint on the eyelids to the point where they looked much more naturally blended. Also, I have brown eyes and they looked out of place on such a green character so I changed the colour of them. Finally, I exaggerated the entire area of the eye to much larger proportions. Of course, the beauty of Photoshop is that you can do these modifications seamlessly and it did the trick. I also increased the size of the character’s nose and mouth, and did the same makeup checks on the lips, while digitally pulling the sides of the mouth up a little to make it look as if the character was grinning more than humanly possible.

A much less human grin.

The Logo

As I showed in an earlier entry, I wanted the character to have a logo of some sort. Something that would tie all of the various elements of the campaign together and I knew roughly what it should look like:

A logo to tie all elements of the campaign together.

Now that we had taken lots of photos, I had something to reference. It was important that it wasn’t just a generic silhouette like in my above sketch but adequately referenced the character. And of course the thing that stands out most about the character besides the fact that he’s green, is his hair. And so this is what I came up with:

You’ll notice that it says Viral Man, not Touching Man, as I’ve been referring to throughout these entries. And I’ll get onto that in a moment.

After designing the logo and writing the copy for the posters, I was very happy with how they looked. And here they are:

All three posters.

You can view larger versions in the project area, which will be going live within a week of this post.

The presentation

After four weeks of working on this project, surprisingly, we had still yet to actually show anything to the committee responsible for giving it the green light. We had wanted to keep it secret until a point at which we could properly present it i.e. The above posters and photoshoots.

On Wednesday, I spent the day designing a screen-based presentation which I was to deliver the next morning to introduce the committee to what we had so far. I travelled to Chester for an 8am start and set the presentation up in the meeting room. At 8:30am, everyone arrived and the reveal took place. I had designed the presentation to slowly describe why the character looked the way he looked by cropping various photos of him, starting at his green shoes and working all the way up to his face. At the final reveal of his face, everyone seemed to like it.

In addition to the reveal Touching Man’s face, I had also been practicing my voice for the character and recorded a basic example script so that the committee could get an understanding of how he would sound in videos. Have a listen.

Unfortunately, there were concerns about the voice sounding too much like a speech difficulty and because it was a university-produced campaign, they didn’t want to offend anyone. This was understandable and the voice was scrapped for something more recognisable and normal.

Overall however, everyone was really pleased with how the campaign had been developed so far and were looking forward to seeing the finalised videos.

One of the things that came up in the meeting was the creation of the website. I hadn’t been looking forward to designing the site as there wasn’t much time to do create it and a Flash website takes time. Luckily however, the c0mmittee expressed their interest in using social networking instead of a website because they were worried about maintaining the site. It meant that we could focus on building the Facebook profile and more time to film the videos.

One final thing that the committee asked for was a second poster campaign that ran with the government’s national campaign’s slogan of “Catch it, Kill it, Bin it”. This meant another trip to the studio on the same day, where Hannah and I spent the afternoon taking more photos.

Photoshoot number 3

Just before we went to the studio, we spent an hour looking for props to use in the three new posters, showing how the character could be caught, killed and binned. That meant buying a net, anti-bacterial gel and a large bin. Quite a strange shopping list.

The photoshoots are fun, but quite tiring. It’s much more than a case of just taking three photos and that’s it. It’s getting the right photo, with the right focus, lighting etc. And this takes a hell of a long time to do. We spent a long time getting shots to look right.

A friend came to help/watch us take more photos in the studio and literally provided a helping hand to hold some anti-bacterial gel to look as if he was killing me with it. I also took some shots of his arm on its own so that I could play around with it in Photoshop and add it to a photo of myself.

At the end of the day, we came away with nearly 300 photos. That night I started to develop the photos into posters.

The name change

The next day, I recieved a priority email alerting us to the fact that the committee had changed their mind about the name “Touching Man” as they felt it had too many negative connotations, especially for a university-led campaign. Instead, they asked if they could use “Viral Man”. This change came after I had already designed the posters, logo and set up the Facebook profile. Admittedly, the four of us responsible for running with the name (And telling the committee about it at an early stage) weren’t happy with the name change and I tried my best to persuade them to keep “Touching Man”. It wasn’t to be though and “Viral Man” was chosen as the new name.

In retrospect, it’s completely understandable. I think that because we had been working on it on our own for four weeks, we had become quite accustomed to the name, regardless of if it was suitable enough for the project. While “Viral Man” is a little more tame and obvious, “Touching Man” does indeed bring too many negative connotations and the name change was justified. And so Viral Man was born.

I made the required changes to the posters and logo and set up another Facebook profile, this time in the name of Viral Man. Luckily, the 2,500 stickers which had been designed for the campaign had not been printed yet and they needed to be changed to reflect the change of Facebook profile address.

And so the penultimate week was over and there were now two poster campaigns, a Facebook profile, stickers, a logo and a countless number of photos that had been taken over the course of three photoshoots. Next week would be all about filming and finally, signing, sealing and delivering the whole campaign to the university in preparation for its launch just a few weeks later.

In the final entry: Two days of filming, an interview with Viral Man and taking delivery of 2,500 spikey balls.

With a clear idea of what our Swine Flu campaign would involve, Touching Man was well on his way to becoming a reality. In the last entry, I wrote about how we had developed a few ideas for what he should look like. In this entry, Touching Man finally makes an appearance. Unfortunately, a lot of the photos that I had for this entry were deleted when I lost a significant amount of my hard drive a few weeks ago and so it’s not as populated with photos as it should be. I apologise for this!

Making Touching Man’s costume

At the end of the previous week, I had spent an hour or two searching online for a stripey green and black jumper or tshirt for Touching Man’s costumes. It’s surprisingly hard to find that combination of colours. Green and white, no problem. Green and black, impossible. Luckily however, eBay came to our rescue and I placed an order for this jumper, which was exactly what I had imagined his top should look like.

We also had to consider what the bottom half of Touching Man should look like. It couldn’t take away from the main focus of his stripey top and with that in mind, we decided on some black jeans and for his shoes, some green flat shoes.

Also at the end of last week, we had purchased some long, neon green tubes for Touching Man’s spikes. They would be cut to size and slotted into the back of the jumper. However, because the jumper cost nearly £20, we didn’t want to go to the trouble of cutting it up only for it to not work and so we decided to buy a cheap £3 tshirt to test it on first.

To make our spikes, we began by cutting them down to 10cm tall. To keep them secure once in the back of the tshirt, we used some thick, sticky paper to place on the inside of the tshirt, before cutting a hole through it and the tshirt, making a slit for the spike, which held it in place quite well.

In addition to the spikes, we had also bought a pack of pegs which we then spraypainted green. We experimented with using the pegs instead of the larger, plastic tubes for spikes and found that the plastic tubes were far more visually appealing than smaller pegs and so we scrapped the pegs altogether. As I said at the beginning of this post, I did have lots of photos of the development process which were unfortunately corrupted when I lost a lot of my data a few weeks ago.

Since it was to be me who would be dressing up as Touching Man, I put the tshirt on and walked around while the spikes were in the back, seeing if they would stay securely in place. For the most part they did, which was good news. For the most part, we had succeed in developing most of Touching Man’s costume. There was one last thing we had to find: A wig.

The Wig

I personally didn’t have any set ideas about what Touching Man’s wig should look like nor did I quite know where we might find one. Luckily, Will and Jerry did and we went searching. Most of the wigs were quite normal and just not flamboyant enough to Touching Man’s personality and then Will spotted the most flamboyant wig we had seen. Wild, blonde with subtle green streaks. Admittedly (and in retrospect wrongly!) I wasn’t very keen on the wig. I didn’t think it was the right choice, but I didn’t know what the right choice was. I was hesitant about buying it but I reluctantly did so in the hope that perhaps it would look ok once it was with the rest of the costume.

The Makeup

On Tuesday, the jumper came and it was spiked-up in a similar way to the tshirt. On Wednesday, it was time to finally try the makeup on along with the costume. I wasn’t looking forward to trying it as I knew that it may be difficult to get off.

Me, Hannah and Will found a quiet room and while they waited outside, I changed into my black jeans, green shoes and stripey top, before coming back in to begin the facepainting, with Hannah taking charge of the small white pad and filling it with green makeup and then applying it to my face. 20 minutes later, my whole face was green. It was surreal to see myself no longer skin-coloured.

I then put the wig on and all of us agreed that the costume, wig and facepaint were a perfect choice. My earlier apprehensions about the wig were now gone, after seeing myself in a few photos that we took at the time. Again, I do apologise but I no longer have them.

I only had the makeup on for 15 minutes as it was only to do a ‘screen test’ of sorts. Getting it off proved to be much harder than putting it on, with both Will and Hannah using plenty of facewipes to get rid of the excess, leaving me a strange shade of orange. In order to get the rest off, I retreated to the toilets, going via the library reception and greeted with some understandably strange looks. Once in the toilets, I spent a good ten or fifteen minutes trying to get my face back to its original colour but didn’t actually succeed. In the end, I got as much as I could off and then the rest in the shower once at home.

Filming

The next day, it was time to begin the filming of our short videos. We had already organised some of the storyboards and this helped us to map out our filming schedule for the day. Again, Hannah took on her makeup assistant role and turned me green and then for the rest of the day, we filmed. It was a really fun experience filming although frustrating as well. Although we had done our best to make sure that the spikes were secure in the back of the jumper, because I was moving around so much, they kept falling out while filming. It meant having to cut and redo the scene, adding time onto the filming and we were already under a very tight schedule. This was in addition to Will and Jerry going down to London later on in the day for a week and so no further filming could be done until they were back.

By the end of the day, we had managed to get roughly 60% of the videos completed, with the rest needing to be completed when Will and Jerry were back.

Touching Man’s First Photoshoot

On Friday, Hannah and I travelled from Chester’s Warrington campus to Kingsway, the university’s dedicated arts campus. Warrington campus unfortunately did not have its own photography studio and because we needed to produce a poster campaign, it was important that the photos looked professional. Neither myself or Hannah are trained photographers so it proved difficult to set up some good shots, but we perservered.

Some of the unmodified photos we took.

Some of the unmodified photos we took.

Some of the unmodified photos we took.

Some of the photos, as you can see from above are a little dark because we didn’t get the settings or lighting as good as it should have been. In other cases though, as with the third photo above, although it’s not white, it does create a nice background and this particular image ending up being internally used to promote the campaign.

Some of the unmodified photos we took.

Some of the unmodified photos we took.

Some of the unmodified photos we took.

As you can see from the above three photos, the studio isn’t particularly huge, but when the photo is cropped to the bounds of the background paper, the photo suddenly feels much bigger.

In the second of the three photos above, you’ll see that I’m hiding behind the paper. One of the assets that we wanted to design for the campaign was desktop wallpaper, which would be placed on all of the library computers. However, I didn’t want Touching Man to dominate the wallpaper but instead simply ‘infect’ it by occupying a small, but noticable space on it. You’ll see what I mean a little more clearly when I make the project live with all of its assets.

Touching Man is Touching Man not because I personally play the character but rather, because he has a very defined personality and appearance including expressions. Take this shot for example:

The character loses all personality when he doesn't smile.

This is one of the test photos where I’m not posing. Notice how with a lack of emotion, all the fun of the character disappears. It was important to retain this crazy, manic look in all of the photos. And retaining such an expression over the course of a five hour photoshoot is quite tiring!

As I had found out already, taking the makeup off proved to be a very timeconsuming process. In fact, although we finished the photoshoot at around 6:30pm, it wasn’t until 7pm that I felt comfortable enough to jump on a train home with the least amount of makeup left on me!

In total, Hannah and I took just under 100 photos. We both kept a copy and over the weekend, I began to see if I could get them to work in a poster campaign. However, as already mentioned, many of the photos that we took weren’t good enough to use and because of this, I decided that a second photoshoot was necessary.

This week had been quite productive and a lot of fun. We had developed Touching Man’s costume, shot some of our short videos and had a photoshoot. Next week would be the penultimate week of our project and it would be a big one.

In the next entry: Two more photoshoots, the unveiling of Touching Man and…a name change?